NEC SL2100 Features And Specifications Manual page 502

SL2100
Restrictions
• When using IP Terminals, assigning the following features to a large number of terminals (16 or
more) is not recommended:
- The same Trunk Line assignment (squared key system)
- The same Virtual Extension assignment
- Paging key with LED ON assignment
- The same location Park key
- The same BLF key assignment
- Day Night Mode Change key assignment
- The same VM Mail Box key assignment
- Trunk Group key
- Trunk Group All Line Busy Indication
I
• One call cannot ring more than 8 simultaneous IP extensions at the same time if the call originates
from ring group or a virtual.
• An SIP Multiline Terminal can override another SIP Multiline Terminal or a Softphone.
• A Softphone can override another Softphone or an SIP Multiline Terminal.
• Override does not support SIP Multiline Terminal with DSS console or Softphone with DSS Console.
• The SL2100 Desktop Application does not support Network Address Translation (NAT).
Because of this, any Desktop Applications must appear to be on the same network as the SL2100
VoIP Interface (VoIPDB). For remote Desktop Applications, like SP310 Softphone, this can be
achieved by a VPN connection to the network the SL2100 resides on.
• When using Override with an active CTI connection, PRG 15-05-39 must be enabled for the
extensions that will be overridden. The overriding terminal must be of the same type and number of
line keys as the terminal to be overridden. If the types of terminals and number of keys are different
between overriding and overridden phones, the Telephony Service Providers (1st Party and 3rd
Party) may not function properly.
Default Settings
None
System Availability
Terminals
All IP Multiline Terminals
Required Software
None
Required Component(s)
CPU with VoIPDB installed
Related Features
None
1-488
ISSUE 1.0
IP Multiline Station (SIP)