NEC SL2100 Features And Specifications Manual page 558

SL2100
In PRG 20-09-03, set the
extension's COS to '0'.
In PRG 20-13-23,
set the extension's
COS to '0'.
I
In PRG 22-02-01,
In PRG 22-04-01,
do not assign
extension to PRI
trunk's Ring
Group.
1-544
Should the sub-address
No
Should an extension
No be able to display the reason why
a vall is transferred to it?
Define the extension's Class
of Service in PRG 20-06-01.
Is SMDR used?
Yes Trunks ring the same
enter 0.
In PRG 22-05-01, assign all the
trunks on a PRI ETU to the same
In PRG 14-07-01 and PRG 15-06-01, set
up the trunk Access Maps for PRI trunks.
Should extension
No
calls on PRI trunk?
In PRG 14-01-01,
A
ID be display for Yes
incoming calles?
Yes
Yes
No
Should all PRI
No
extensions?
Ring Group.
ring for incoming
Yes
For each extension in the Ring
assign names to
Group, in PRG 22-06-01, enter
trunks to make
identification
easier.
Go to
B
ISSUE 1.0
In PRG 20-13-23, set the
extension's COS to '1'.
In PRG 20-13-23,
set the extension's
COS to '1'.
In PRG 35-02-15, enter '0' to
print Caller ID Number, "1" DID
Calling Number or '2' Caller ID
Name.
In PRG 35-02-16, enter '0' to
print the trunk port name
assigned in PRG 14-01-01 or
enter '1' to print the
received dialed number.
In PRG 22-02-01, enter 3.
Refer to the
Programming Manual
or Networking Manual.
In PRG 22-04-01,
assign extension
to PRI trunk's Ring
Group.
'1' for each time mode when
the extension should ring.
ISDN Compatibility