NEC SL2100 Features And Specifications Manual page 270

SL2100
Program
No.
12-04-01 Holiday Night Service Switching
15-07-01 Programmable Function Keys
D
20-07-26 Class of Service Options (Administrator Level) -
Dial-In Mode Switch
22-02-01 Incoming Call Trunk Setup - Trunk Service Type
22-11-02 DID Translation Table - Target Number
22-17-01 Dial-In Conversion Table Area Setup for Time
Pattern - Received Dial
22-17-02 Dial-In Conversion Table Area Setup for Time
Pattern - Start of Time
22-17-03 Dial-In Conversion Table Area Setup for Time
Pattern - End of Time
22-17-04 Dial-In Conversion Table Area Setup for Time
Pattern - Dial-In Conversion Table Number
22-17-05 Dial-In Conversion Table Area Setup for Time
Pattern - Day of week
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
20-09-01 Class of Service Options (Incoming Call Service)
- Second Call for DID/DISA/DIL/E&M Override
20-13-23 Class of Service Options (Supplementary Serv-
ice) - Display the Reason for Transfer
21-01-02 System Options for Outgoing Calls - Intercom In-
terdigit Time
1-256
Program Name Input Data
Night Mode Service Group No.;
01-04
Days and Months: 0101 ~ 1231
(e.g. 0101 = Jan. 1; 1231 = Dec.
31)
Time Pattern Number: 0 ~ 10
(0 = No Setting)
Line Key 1 ~ 24
0 ~ 99 (Normal Function Code
751 by default)
00 ~ 99 (Appearance Func-
* *
tion Code)
(Service Code 752 by default)
0 = Off (Station cannot control
DDI switching.)
1 = On (Station can control DDI
switching.)
0 = Normal
1 = VRS (second dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = Tie Line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID (DDI) Mode Switching
Maximum 36 digits
(0 ~ 9, , #, @)
*
Up to eight digits
0000 ~ 2359 (Time)
0000 ~ 2359 (Time)
1 ~ 1000 (These are the table
entries in PRG 22-11.)
1: Sun
2: Mon
3: Tue
4: Wed
5: Thu
6: Fri
8: Sun
9: Holiday
0 = Off
1 = On
1 ~ 15
0 = Off (2nd call will not be al-
lowed.)
1 = On (2nd call is allowed.)
0 = Off
1 = On
0 ~ 64800 seconds
Direct Inward Dialing (DID)
ISSUE 1.0
Default
No Setting
Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
COS1 ~ 14/COS15 = 1
0
Refer to the program-
ming manual for the
default values.
No Setting
0000
0000
0
1
Extension 101 is Class
15 and other Extension
are Class 1
COS 01 ~ 15 = 1
COS 01 ~ 15 = 0
10