Dial Tone Detection - NEC SL1000 Features And Specifications Manual

ISSUE 1.0
Description
If a trunk has Dial Tone Detection enabled, the system monitors for dial tone from the Telco or PBX
when a user places a call on that trunk. If the user accesses the trunk directly (by pressing a line key
or dialing #9 and the trunk number), the system drops the trunk if dial tone does not occur. If the user
accesses the trunk via a Trunk Group (by dialing a trunk group code or automatically using a feature
like Last Number Redial), the system can drop the trunk or optionally skip to the next trunk in the
group. Refer to the chart under Programming for more information.
Conditions
None
Default Settings
Disabled for manually dialed calls; enabled for automatically dialed calls.
System Availability
Terminals
All Stations
Required Component(s)
None
Related Features
Abbreviated Dialing/Speed Dial
Automatic Route Selection (ARS/F-Route)
Central Office Calls, Placing
Last Number Redial
Save Number Dialed
Trunk Group Routing
Trunk Groups
Guide to Feature Programming
Program Number
10-09-01 DTMF and Dial Tone Circuit Setup
14-02-05 Analog Trunk Data Setup - Dial Tone Detection for
Manually Accessed Trunks
14-02-11 Analog Trunk Data Setup - Next Trunk in Rotary if No Dial
Tone
Features and Specifications Manual

Dial Tone Detection

Program Name
SL1000
Default
Resource 01 - 132 = 0 (Common)
1
0
D
1-159