NEC SL1000 Features And Specifications Manual page 420

SL1000
Intercom calls. When using the @, the system waits for the destination to answer (answer supervi-
sion), and then sends the rest of the digits.
• Entering a P (pause) in a DSS/One Touch dial string can be used for CO calls, Intercom calls, or after
the @ for ISDN calls.
• DSS/One-Touch keys can be used for one-touch transfer.
• DSS keys can distinguish whether the telephone is set for DND/Call Forward All Calls of if the tele-
phone is off-hook.
• When a Ring Group call rings a station, a BLF Indication for this station shows idle or busy based on
Class of Service option (20-13-49).
• All features programmed under one touch keys are still subject to class of service restrictions.
• If you change the extension assigned to a port in Program 11-02, the line key programming does not
follow. However, if you move the extension using the Station Relocation Feature, the line key pro-
gramming does follow.
P
• In order for a station to retrieve a held ICM call, the station must have an ICM key assigned in 15-07
( 00).
*
Default Settings
The first 12 keys on a telephone are Line keys (e.g., key 01 = line 001). The remaining keys are unas-
signed.
System Availability
Terminals
All Multiline Terminals
Required Component(s)
None
Related Features
Abbreviated Dialing/Speed Dial
Direct Station Selection (DSS) Console
One-Touch Calling
Guide to Feature Programming
Program Number
15-07-01
20-06-01
20-07-10
20-13-18
20-13-49
1-412
Program Name
Programmable Function Keys
Class of Service for Extensions
Class of Service Options (Administrator Level) -
Programmable Function Key Programming (Appear-
ance Level)
Class of Service for Options (Supplementary
Service) - Programmable Function Key Programming
(General Level)
Class of Service for Options (Supplementary
Service) - BLF Indication on CO Incoming State
ISSUE 1.0
Default
Refer to Programming Manual.
All extension port = Class 1
COS 01~15 = 1
COS 01~15 = 1
COS 01~15 = 0
Programmable Function Keys