NEC SL1000 Features And Specifications Manual page 401

ISSUE 1.0
Program Number
20-11-25 Class of Service Options (Hold/Transfer Service) -
Transfer Park Call
20-11-26 Class of Service Options (Hold/Transfer Service) -
Station Park Hold Mode
20-11-27 Class of Service Options (Hold/Transfer Service) -
Call Park Automatically Search
24-01-02 System Options for Hold - Hold Recall Callback
Time
24-01-06 System Options for Hold - Park Hold Time - Normal
24-01-07 System Options for Hold - Park Hold Time -
Extended (Recall)
24-03-01 Park Group - Park Group Number
Operation
To Park a call in a system orbit:
You can Park Intercom or trunk calls.
1. Press the Park key (Program 15-07 or SC 852 :
The Park key LED lights.
If you hear busy tone, the orbit is busy. Try another orbit.
2. Use Paging to announce call.
3. Press Speaker to hang up.
If not picked up, the call recalls to you.
- OR -
1. At the multiline terminal, press Hold.
- OR -
At a single line telephone, hookflash.
2. Dial #6 and the Park orbit (01~64).
If you hear busy tone, the orbit is busy. Try another orbit.
If you hear a busy tone, the orbit is busy. Dial #6
toSearching) to search for an idle park location in ascending order.
3. Use Paging to announce the call.
4. Press Speaker to hang up.
If not picked up, the call recalls to you.
The parked call recalls after the Park Hold Time (Program 24-01-06). The call rings the extension to
which it recalled for the Hold Recall Callback Time (Program 24-01-02). The call then goes on Hold
for the Park Hold Time, then recalls again for the Hold Recall Callback Time. The call continues to
cycle between Hold and recall until the extension user answers the call or the outside party hangs up.
Features and Specifications Manual
Program Name
04 + orbit).
*
if enabled in Program 20-11-27 (Call Park Au-
*
Default
COS 01~15 = 0
COS 01~15 = 0
COS 01~15 = 1
30 (seconds)
90 (seconds)
300 (seconds)
1
SL1000
P
1-393