NEC SL1000 Features And Specifications Manual page 465

ISSUE 1.0
Operation
To select a message:
1. Press Speaker.
2. Dial 836 .
-OR-
Press the Text Message key (Program 15-07 or SC 851 : 18) + enter digits to append (if needed)
+ Speaker to hang up. Skip the remaining steps.
3. Enter message number
4. + enter digits to append (if needed) + Speaker to hang up. Skip the remaining steps.
5. (Optional for messages 1~8 and 10.)
Dial the digits you want to append to the message.
You can append messages 1~8 and 10 with digits (e.g., the time when you will be back). Enter the time in
24-hour format.
6. Press Speaker to hang up.
Intercom calls to extensions with Selectable Display Messaging set receive a DND signal and receive the
display message on their telephone display instead of ringing the extension based on the setting in Pro-
gram 20-01-02.
To allow calls to ring through and have the message displayed on the calling extension display, cancel
DND by pressing DND + 0.
To cancel a message:
1. Press Speaker and the Text Message key (Program 15-07 or SC 851 : 18).
2. Press Speaker to hang up.
Using the Text Message Service Code to select a message:
1. Press Speaker and dial the Text Message service code (Program 11-11-14).
2. Dial the Selectable Display Message number to be used (01~20).
(Optional messages 1~8, and 10, dial the digits you want to append to the message.)
3. Press Speaker to hang up.
To cancel, repeat Step 1 and hang up.
Features and Specifications Manual
SL1000
S
1-457