NEC SL1000 Features And Specifications Manual page 303

ISSUE 1.0
Related Features
Handsfree Answerback/Forced Intercom Ringing
Intercom
Line Preference
Name Storing
Guide to Feature Programming
Program
Number
11-11-13 Service Code Setup (for Setup/Entry Operation) - Display
Language Selection for Multiline Terminal
15-02-01 Multiline Telephone Basic Data Setup - Display Language
Selection
20-06-01 Class of Service for Extensions
20-08-01 Class of Service Options (Outgoing Call Service) -
Intercom Calls
20-08-11 Class of Service Options (Outgoing Call Service) - Protect
for the Call Mode Switching from Caller
20-11-07 Class of Service Options (Hold/Transfer Service) -
Transfer Without Holding
20-13-22 Class of Service Options (Supplementary Service) - Busy
Status Display (Called Party Status)
20-17-01 Operator Extension - Operator's Extension Number
20-18-01 Service Tone Timers - Extension Dial Tone Time
21-01-02 System Options for Outgoing Calls - Intercom Interdigit
Time
82-01-01 (01) Incoming Ring Tone - Frequency 1
82-01-02 Incoming Ring Tone - Frequency 2
82-01-03 Incoming Ring Tone - Modulation
Handsfree Answerback/Forced Intercom Ringing:
Program
Number
20-02-12 System Options for Multiline Telephones - Forced
Intercom Ring (ICM Call Type)
20-06-01 Class of Service for Extensions
20-08-10 Class of Service Options (Outgoing Call Service) -
Signal/Voice Call
20-09-05 Class of Service Options (Incoming Call Service) -
Signal/Voice Call
20-13-06 Class of Service Options (Supplementary Service) - Auto-
matic Off-Hook Signaling (Automatic Override)
80-01-01 (28) Service Tone Setup - Tone 28 (Speaker Monitor Tone)
80-01-02 Service Tone Setup - Basic Tone Number
Features and Specifications Manual
Program Name
Program Name
SL1000
Default
778
1
All extension port = Class 1
COS 01~15 = 1
COS 01~15 = 0
COS 01~15 = 0
COS 01~15 = 0
200
120 (seconds)
10 (seconds)
Refer to Programming Manual.
2
Default
1
All extension port = Class 1
COS 01~15 = 1
COS 01~15 = 1
COS 01~15 = 0
Refer to Service tones
(Service Tone #28).
Refer to Programming Manual.
I
1-295