NEC SL1000 Features And Specifications Manual page 511

ISSUE 1.0
3. Announce your call and press Transfer (Program 15-07 or SC 851 : 06) or hang up.
With Automatic On-Hook Transfer
When you hang up, the call is automatically transferred.
Without Automatic On-Hook Transfer
You must press your Transfer Programmable Function Key to Transfer the call.
To Transfer the call unscreened, press your Transfer Programmable Function Key and hang up without
making an announcement.
Transferring a Call into a Conference/Existing Call
1. While on a call, press Transfer and dial service code defined in Program 11-12-58.
The display shows Transfer to Conf. ICM Dial.
2. Enter the extension number of the co-worker currently on a Conference call to which the call
should be transferred.
To cancel the transfer, press the flashing line key to retrieve the call.
If an error tone is heard, Barge-In is not enabled for the extension and the call does not go through . Re-
trieve the call by pressing the flashing line key or hang up and the call recalls the extension.
3. The transferred call is incorporated into the conference call.
The callers hear the Barge-In tone if enabled in Program 20-13-17.
If a call is transferred into a Barge-In Conference (an existing 2-party call into which an extension user
has used the Barge-In feature to join), the Conference becomes a regular 4-party Conference call.
4. Hang up.
Transferring a Call to a Trunk Ring Group
1. While on a call, press Transfer.
2. Dial the Transfer to Ring Group service code defined in Program 11-15-09.
You hear confirmation tone.
3. Hang up.
The call is transferred to the trunk ring group defined in Program 22-05-01 and all assigned extensions in
the group (Program 22-04-01) ring or it rings the External Paging, enabling anyone to answer the call.
Tranferring an Intercom or Trunk Call using a DSS/One-Touch Key
1. While on a call, press the DSS/One-Touch key.
2. Announce the call or hang up.
Features and Specifications Manual
SL1000
T
1-503