NEC SL1000 Features And Specifications Manual page 98

Hide thumbs Also See for SL1000:
Table of Contents

Advertisement

SL1000
the call by pressing the line key if Automatic Handsfree in Program 15-02-08 is set to 0 (Pre-select).
• Caller ID information outputs on the SMDR report.
• The system can send Caller ID digits to the voice mail if allowed in Program 14-01-22.
• When there are more than 20 characters set in Program 20-20 : Message Setup for Non-Caller ID
Data, either the first or last character is missing (based on the entry in Program 20-19-01).
• If Program 20-09-06: Class of Service Options (Incoming Call Service): Incoming Time Display is set
to 1 (On), the first line displays the time and date.
• Program 15-07-01 button (63) when enabled, removes the CPN from the setup message when mak-
ing an outbound ISDN call, this is a toggle enable/disable button and can be used on a Call-by-Call
basis. Programs 14-01-20, 14-01-21 and 20-08-15 are used for analog trunks only and can only be
set on a per trunk/Class of Service basis.
• SLT users cannot block an incoming call based on the incoming Caller ID information on a station-by-
station basis.
C
• The CPU with MEMDB has 36 resources for DTMF receiving and Dial Tone detection. When a EXIFE
installed there are 32 resources available.
• When Program 10-09-01 is set to 0 (Common) and Program 14-02-10 (Caller ID) is set to 1 (Yes), all
DTMF/Dial Tone Detection resources are always allocated to analog trunks, not analog exetensions.
However, if Program 14-02-10 (Caller ID) is set to 0 (No), all DTMF/Dial Tone Detection resources
can be used for both analog trunks and analog extensions.
• For the Caller ID List to show calls to a station that received a busy tone, Program 15-02-57 must be
set 1 (On).
• When Program 15-02-57 is set to 1 (On) and Program 15-02-34 is set to 0 (Trunk), only outside calls
are shown in the Caller ID List.
Default Settings
Disabled
System Availability
Terminals
All Multiline Terminals with a display and Single Line Telephones equipped to receive Caller ID
Required Component(s)
• 408M-A1, 408E-A1
• 2BRIDB-C1
• 1PRIU-C1
Related Features
Abbreviated Dialing/Speed Dial
Automatic Route Selection (ARS/F-Route)
Call Arrival (CAR) Keys
Caller ID Call Return
Conference, Voice Call/Privacy Release
Park
Station Message Detail Recording
InMail
1-90
ISSUE 1.0
Caller ID

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents