NEC SL1000 Features And Specifications Manual page 140

SL1000
Program
Number
20-08-08
21-09-01
21-09-02
21-10-01
90-19-01
C
Operation
To set Dial Block:
1. At the multiline terminal, press Speaker.
- OR -
At the single line telephone, lift the handset.
2. Dial 700 (default).
3. Dial the 4-digit Dial Block Code (as set in programming).
4. Dial 1.
Confirmation tone is heard.
5. Press Speaker or replace the handset to hang up.
To release Dial Block:
1. At the multiline terminal, press Speaker.
- OR -
At the single line telephone, lift the handset.
2. Dial 700 .
3. Dial the 4-digit Dial Block code.
4. Dial 0.
Confirmation tone is heard.
5. Press Speaker or replace the handset to hang up.
To set Dial Block from another extension:
1. At the multiline terminal, press Speaker.
- OR -
At the single line telephone, lift the handset.
2. Dial 701 (default).
3. Dial the 4-digit Dial Block code (as set in programming).
4. Dial the extension number to blocked.
5. Dial 1.
Confirmation tone is heard.
1-132
Program Name
Class of Service Options (Outgoing Call Service) - Toll
Restriction Dial Block
Dial Block Setup - Toll Restriction Class with Dial Block
Dial Block Setup - Supervisor Password
Dial Block restriction Class per Extension
Dial Block Release
Code Restriction, Dial Block/Toll Restriction, Dial Block
ISSUE 1.0
Default
COS 01~15 = 0
1
not assigned
0
[Release?]: Dial 1+ press Hold
(Press Hold to cancel.)