NEC SL1000 Features And Specifications Manual page 117

ISSUE 1.0
Program
Number
21-01-17 System Options for Outgoing Calls - Restriction
Digit in Outgoing Disable on Incoming Line
21-02-01 Trunk Group Routing for Extensions
21-15-01 Individual Trunk Group Routing for Extensions
24-02-07 System Options for Transfer - Trunk-to-Trunk
Transfer Release Warning Tone
24-02-10 System Options for Transfer - Disconnect Trunk
to Trunk Timer
Operation
To place a call over a trunk group:
1. Go off-hook.
2. Dial 804 .
3. Dial trunk group number (01~25).
4. Dial the number.
- OR -
1. At the multiline terminal, press the trunk group key (Program 15-07-01 or SC 851 :
group).
2. Dial the number.
To place a call using Trunk Group Routing:
1. Go off-hook.
2. Dial 9.
If your system has an Alternate Trunk Route Access code, you may dial that instead.
3. Dial the number.
- OR -
1. At the multiline terminal, press the Trunk Group Routing key (Program 15-07-01 or SC 852 :
02 plus trunk group).
*
2. Dial the number.
To place a call over a specific trunk:
1. Dial #9 .
2. Dial the line number (e.g., 005 for line 5).
3. Dial the number.
- OR -
1. At the multiline terminal, press line key (Program 15-07-01 or SC 852 :
2. Dial the number.
To busy out a trunk from outbound usage:
1. Press Speaker + 745 + Trunk Number (001~126) + 1.
The user which busied out the trunk still has access to it. All other users are blocked from seizing it to
place an outgoing call. The trunk, however, can still be answered by any user programmed with the trunk
access.
Features and Specifications Manual
Program Name Default
4
1
0
1800 (seconds)
0 (seconds)
01 001 to 126 ).
*
SL1000
Note
C
02 +
*
1-109