NEC SL1000 Features And Specifications Manual page 459

ISSUE 1.0
To record Watching message to VRS 001:
1. Press Speaker+716+7+001 at terminal.
2. After beep tone, record message.
3. Press Speaker and finish recording.
Set up Watch mode
1. Press Speaker+714 at terminal.
2. Dial Internal paging group number, "01".
3. Dial external paging group number, "1".
4. Dial Interval time of Watching message, "05".
5. Dial VRS message number for watching, "001".
6. After beep tone, record the message.
7. Press Speaker and finish recording.
To start Watch mode
1. Press Speaker+817 +1 at terminal.
- OR -
2. Press Function key (
- OR -
3. Watch mode time pattern 1 comes time to start.
4. Each 5 minutes interval, Watching message send to internal page group 1 and external page
group 1.
To stop Watch mode
1. Press Speaker+817 +0 at terminal
- OR -
2. Press red on Function key (
- OR -
3. Watch mode time pattern 1 comes time to stop.
Warning Message (Use Security Sensor and Warning message)
< Program >
PRG11-10-47: 715 ; Warning message setting
PRG11-10-48: 717 ; Auto Dial Setting for Security Sensor
PRG11-12-62: 816 ; Security Sensor Reset
PRG11-12-64: 819 +1/0; Security Sensor Mode Start/Stop
PRG15-07-01: Set " 33" to Function key
*
PRG20-46-01: 1; Sensor mode, on
PRG20-46-02: 1; Internal paging group, 1
PRG20-46-03: 1; External paging group 1
PRG20-46-04: 1; VRS message number for warning, 1
PRG20-46-05: 999; Speed dial bin number, 999
PRG20-46-06: 2; VRS message number for destination answer, 2
PRG20-46-07: 30; Auto Dial Wait Timer, 30 sec
PRG20-46-08: 3; Times of auto repeat dial, 3
PRG20-46-09: 30; Auto dial calling time, 30 sec
PRG20-46-10: 200; Monitored terminal number, 200
PRG20-46-11: 30; Interval of Auto Dial, 30 sec
PRG20-48-01: 1; Security sensor time pattern, 1
Features and Specifications Manual
32) at Multiline terminal and Function key turn on Red.
*
32) at Multiline terminal and Function key turn off.
*
SL1000
S
1-451