NEC SL1000 Features And Specifications Manual page 270

SL1000
Multiline Terminal
1. Press the Voice Mail Record key (Program 15-07 or SC 851 : code 78)
You hear a beep and your Record key flashes. The system beeps periodically to remind you that you are
recording.
To stop recording, press the Voice Mail Record key again. You can restart and stop recording as required.
- OR -
1. Press Hold.
2. Dial 754 .
The system automatically reconnects you to your call.
I
To stop recording, place the call on hold then pick the call back up. You can restart and stop recording as
required.
Single Line Telephone
1. Hookflash.
2. Dial 754 .
The system automatically reconnects you to your call.
To stop recording, hookflash twice. You can restart and stop recording as required.
Personal Answering Machine Emulation (multiline terminal Only)
To enable or cancel Personal Answering Machine Emulation:
1. Press Speaker (or lift the handset at the single line telephone) and choose from the following dial
access codes:
848 = Call Forward – Immediate
#1 = Call Forward – Busy
845 = Call Forward – No Answer
844 = Call Forward – Busy/No Answer
842 = Call Forward – Both Ring
846 = Call Forwarding – Follow Me
2. Dial the Voice Mail master number.
3. Press Speaker to hang up (or hang up handset at the single line telephone).
When Personal Answering Machine Emulation broadcasts your caller's message, you
can:
Your telephone must be idle (not on a call).
1. Do nothing.
The message is automatically being recorded in your mailbox. The broadcast stops when your caller
hangs up.
- OR -
1. Lift the handset to intercept the call.
You connect to the caller. The system records the first part of the message in your mailbox. The line key
changes from red to green.
- OR -
Press Speaker to cut off the message broadcast and send the call to your mailbox.
Voice Mail records the entire message in your mailbox.
1-262
ISSUE 1.0
InMail