NEC SL1000 Features And Specifications Manual page 535

ISSUE 1.0
Operation
Calling your Mailbox
To call your mailbox:
Multiline Terminal
1. Press your Voice Mail key (Program 15-07 or SC 851 : 77).
- OR -
Press Speaker and dial the Voice Mail Master Number. After Voice Mail Answers, dial your
mailbox number.
Your mailbox number is normally the same as your extension number. You may optionally dial a co-
worker's mailbox - or use this procedure to call your mailbox from a co-worker's telephone.
2. If requested by Voice Mail, enter your security code.
Ask your Voice Mail system administrator for your security code.
Normally, your Message Waiting LED goes out (if applicable). If it continues to flash, you have unan-
swered Message Waiting requests or a new General Message.
Single Line Telephone
1. Lift the handset and dial
If you are at a co-worker's telephone, you can dial the Voice Mail master number and your mailbox num-
ber instead. You can also use this procedure from your own telephone to call a co-worker's mailbox.
2. If requested by Voice Mail, enter your security code.
Recording your Call
Multiline Terminal
To record your active call in your mailbox:
1. Press Voice Mail Record key (Program 15-07 or SC 851 : code 78).
You hear two beeps and your Record key flashes. The beeps periodically repeat to remind you that you
are recording.
To stop recording, press the Voice Mail Record key again. You can restart and stop recording as required.
- OR -
1. Press Hold.
2. Dial 754 .
The system automatically reconnects you to your call.
To stop recording, place the call on hold then pick the call back up. You can restart and stop recording as
required.
Single Line Telephone
1. Hookflash.
2. Dial 754 .
The system automatically reconnects you to your call.
To stop recording, hookflash twice. You can restart and stop recording as required.
Features and Specifications Manual
8.
*
SL1000
V
1-527