NEC SL1000 Features And Specifications Manual page 116

SL1000
Program
Number
14-01-07
14-01-10
14-02-05
14-02-11
14-02-14
14-05-01
C
14-06-01
14-07-01
15-02-01
15-02-08
15-03-03
15-06-01
15-07-01
15-13-01
15-13-02
20-02-06
20-02-09
20-06-01
20-07-12
20-08-02
20-13-13
21-01-15
21-01-16
1-108
Program Name
Basic Trunk Data Setup - Outgoing Calls
Basic Trunk Data Setup - DTMF Tones for
Outgoing Calls
Analog Trunk Data Setup - Dial Tone Detection
for Manually Accessed Trunks
Analog Trunk Data Setup - Next Trunk in Rotary
if No Dial Tone
Analog Trunk Data Setup - Loop Start/Ground
Start
Trunk Group - Trunk Group Number
Trunk Group Routing - Priority Order Number
Trunk Access Map Setup
Multiline Telephone Basic Data Setup - Display
Language Selection
(To select options 8~10, press either 8 or Flash,
then press line keys 1~3. Key 1 is option 8, Key 2 is
option 9, and Key 3 is option 10.)
Multiline Telephone Basic Data Setup - Auto-
matic Handsfree
Single Line Telephone Basic Data Setup -
Terminal Type
Trunk Access Map for Extensions
Programmable Function Keys
Loop Keys - Outgoing Option
Loop Keys - Incoming Option
System Options for Multiline Telephones -
Preselection Time
System Options for Multiline Telephones -
Disconnect Supervision
Class of Service for Extensions
Class of Service Options (Administrator Level) -
Trunk Port Disable
Class of Service Options (Outgoing Call
Service) - Trunk Outgoing Calls
Class of Service Options (Supplementary
Service) - Continued Dialing (DTMF) Signal on
ICM Call
System Options for Outgoing Calls - Outgoing
Disable on Incoming Line (Toll Restriction)
System Options for Outgoing Calls - Supervise
Dial Detection Timer
Default
1
1
1
0
0
Trunk Port 1~126 = Priority 1~126
Route 1, Order Number 1 = 1
(Trunk Group 1), Order Numbers
2, 3, 4 = 0 (Not Specified)
All Other Routes (2~100) and
Order Numbers (1~4) = 0 (Not
Specified)
Access Map 1 = Trunk Ports
1~126 assigned with option 7
access (incoming and outgoing
access and access when trunk is
on Hold).
Access Map 2~126 = Trunk Ports
1~126 assigned with option 0
access (No access).
1
1
0
1
Refer to Programming Manual.
0: Programming Function Key No.
= 01-32
0: Programming Function Key No.
= 01-32
5 (seconds)
1
All extension port = Class 1
COS 01~15 = 1
COS 01~15 = 1
COS 01~15 = 1
0
20 (seconds)
Central Office Calls, Placing
ISSUE 1.0
Note