NEC SL1000 Features And Specifications Manual page 333

ISSUE 1.0
2. Dial number.
To answer a call on a loop key:
Listen for ringing a look for a flashing loop key.
1. Press loop key.
The key lights green and you connect to the call.
If there are additional calls waiting to be answered, your display shows: [WAITING - LOOP KEY]
To program a loop key:
1. Press the Speaker key.
2. Dial 852.
3. Press the key you want to program as a loop key.
4. Dial 05.
*
5. Dial the loop key type:
• 0 = Incoming only
• 1 = Outgoing only
• 2 = Both ways (incoming and outgoing)
6. Dial the loop key routing option for incoming, outgoing, or incoming and outgoing calls:
• 000 = Trunk Group Routing or ARS (if installed)
• 001~025 = Trunk Groups
If you selected option 2 in step 5 above, enter the incoming Trunk Group followed by the outgoing
Trunk Group.
7. Press Speaker to hang up.
Features and Specifications Manual
SL1000
L
1-325