NEC SL1000 Features And Specifications Manual page 359

ISSUE 1.0
2. Dial the desired Intercom number or dial the trunk access code to place an outgoing call.
Answering a Call on the Mobile Extension
1. Answer the ringing call.
2. If Program 15-22-02 is set to 0 or 1, the Mobile Extension user hears Music on Hold/ring tone.
Press (within 10 seconds) to answer the call.
*
This step is required when using analog trunks for the Mobile Extension feature.
Sending a Flash from the Mobile Extension
1. While on a conversation, a hook flash is returned by dialing
Internal Dial Tone After Hang Up
1. When a call is finished, disconnect the call and receive internal dial tone by dialing
Placing/Retrieving a Call on Hold from the Mobile Extension
1. While on a call, press
2. To retrieve the held call, with system dial tone, press
Swapping Between Two Held Calls from the Mobile Extension
1. While on a call, press
The first call is placed on Hold.
2. Place second call, then place on Hold by pressing
The second call is placed on Hold and the first call is picked up.
3. The Mobile Extension can connect the two held calls with Automatic On-Hook Transfer if Program
20-11-11 is enabled by dialing
Transferring a call from the Mobile Extension
1. With an active call, press
2. Dial the extension number to which the call is to be transferred.
3. Dial 0.
*
4. Hang up.
Call Forwarding
When setting Call Forwarding from the Mobile Extension, the service code(s) must be redefined in
Programs 11-10-18, 11-11-06 and 11-11-40 and also must be defined in Programs 11-11-01 - 11-11-05
and 11-11-07.
To activate or cancel Call Forwarding to/from the Mobile Extension:
1. When activating Call Forwarding From the Mobile Extension:
Dial the DID or DIL telephone number for the Mobile Extension.
If the Caller ID of the Mobile Extension matches the Speed Dial bin entry (Program 13-04 and
15-22), internal dial tone is heard by the Mobile Extension user.
- OR -
When activating Call Forwarding to the Mobile Extension:
Press CALL key or lift the handset.
2. Dial the service code defined in Program 11-11-01 - 11-11-05 and 11-11-07.
3. Dial Call Forwarding condition:
1 = Set
0 = Cancel
4. Dial destination extension or Off-Premise number.
5. Dial 0 (from Mobile Extension only):
*
Change to Step.
To activate Call Forward Follow Me:
1. When activating Call Forwarding From the Mobile Extension:
Dial the DID or DIL telephone number for the Mobile Extension.
Features and Specifications Manual
#.
*
#.
*
0.
*
#.
*
# from the Mobile Extension.
*
#.
*
#.
*
SL1000
0.
*
M
1-351