NEC SL1000 Features And Specifications Manual page 545

ISSUE 1.0
5. Press # to hear the message again.
- OR -
To hear another message, dial 5 and then enter the message number (01~100). - OR -
Hang up.
To erase a previously recorded VRS message:
1. Press Speaker or lift the handset.
- OR -
At a single line telephone, lift the handset.
2. Dial 716 .
3. Dial 3 (Erase).
4. Dial the number of the VRS message you want to erase (001~100).
5. Press Hold (multiline terminal only) to cancel the procedure without erasing (and return to step 3).
- OR -
Hang up to erase the message.
To record, listen to or erase a VRS message if you call in using DISA:
1. Place call to the system.
You hear dial tone.
2. After the system answers, dial the DISA password (normally 000000).
You hear dial tone.
3. Dial 716 and the VRS password.
4. Dial the function you want.
7 = Record
5 = Listen
3 = Erase
5. Dial the message number (001~100), record the message and press # to end recording.
If you dialed 7 to record, you can dial # to listen to the message you just recorded.
If you dialed 5 to listen, you can dial 5 and the message number to hear it again or if you want to Record,
listen to or erase another message, go back to step 4.
General Message
To listen to the General Message:
Multiline Terminal Only
Your Message Waiting LED flashes when there is a new General Message. A voice message periodi-
cally reminds you.
1. Do not lift the handset or press Speaker.
2. Dial 711 .
You hear the General Message.
Normally, your MW LED goes out. If it continues to flash, you have unanswered Message Waiting re-
quests or new messages in your Voice Mail mailbox.
To record, listen to or erase the General Message:
1. Press Speaker or lift the handset.
- OR -
At single line telephone, lift the handset.
Features and Specifications Manual
SL1000
V
1-537