NEC SL1000 Features And Specifications Manual page 316

SL1000
Programming Flowchart of ISDN-PRI - Placing Calls
I
In 20-08-02, enter 0 to
disable outgoing calls.
In 20-06-01, assign
Class of Service to extensions.
In 20-08-01, ebter 0 to
disable calling number
display by telco.
In 20-13-31, enter
ID display by telco.
1-308
In 10-03-01, determine the mode of the
IP4WW-1PRIU-C1(0=not set, 1=T-Bus)
In 10-03-03, ebter
No
'0'.
In 10-03-04, select the Layer 3 timer type (1-5). The timer value is
set up in Program 81-06 (T-Bus)
In 10-03-06, determine the length of cable used to connect from the CSU to
(0=0-40m, 1=40-81m, 2=81-122m, 3=122-162m, 4=162-200m)
In 10-03-08, enter
Enblock
'0'.
Should system users be able to place
No
Stop
No
0 to disable trunk
No
Start
Is the CRC
Multi-Frame
Yes
(CRC4)
used?
the IP4WW-1PRIU-C1
Is the Dial
Sending Mode
Enblock or
Overlap
Overlap
Sending?
outgoing calls on trunks?
Should telco display the
calling number for outgoing
calls?
Should telco display the
trunk identification for
outgoing calls the extension
places?
Go To
A
ISSUE 1.0
In 10-03-03, ebter
'1'.
In 10-03-08, enter
'1'.
In 10-03-09, select either
Keypad Facility (0) or
Called Party Number (1) for
the dial information element.
20-08-02, enter '1' to
Yes
enable outgoing
calls.
In 20-08-13, enter 1 to
Yes
enable calling number
display by telco.
In 20-13-31, enter
Yes
1 to enable trunk
ID display by telco.
ISDN Compatibility