NEC SL1000 Features And Specifications Manual page 144

SL1000
Program
Number
20-13-16
20-14-11
Operation
To establish a Conference:
C
Multiline Terminal
1. Establish intercom or trunk call.
2. Press Conf or Conf softkey (Program 15-07 or SC 851 : 07).
3. Dial the extension you want to add.
- OR -
Access outside call.
- OR -
Retrieve call from Park orbit.
To get the outside call, you can either press a line key or press the Speaker key and dial 9, the Trunk Ac-
cess Code + the trunk number (default #9 ). You can optionally go back to step 2 to add more parties to
your Conference.
4. When called party answers, press the Conf softkey or Conf twice.
If you cannot add additional parties to your Conference, you have exceeded the system Conference limit.
If the call being added is busy/unanswered: With an outside call, press the line key for a call previously
added to the Conference. The unanswered call drops and the initiator is back into the Conference call.
Adding an Intercom call to an outside Conference call: Press the Conf softkey on the Multiline Terminal
display or Conf twice to re-establish the Conference. If using a non-display telephone, press Conf twice.
With only Intercom calls in the Conference: Press Conf twice to re-establish the Conference. If the voice
mail answers, there is no way to drop that extension out. You must drop the Conference call.
5. Repeat steps 2~4 to add more parties.
Single Line Telephone
1. Establish intercom or trunk call.
2. Hookflash and dial 826 .
3. Dial extension you want to add.
- OR -
Access trunk call.
- OR -
Retrieve call from Park orbit.
4. Hookflash and repeat step 3 to add more parties.
- OR -
Hookflash twice to set up the Conference.
To Split (alternate) between the parties in Conference:
Multiline Terminal
1-136
Program Name
Class of Service Options (Supplementary
Service) - Barge-In, Receive
Class of Service Options for DISA - DISA/Tie
Trunk Barge-In
Default
COS 01~15 = 1
COS 01~15 = 0
ISSUE 1.0
Note
Conference