Isdn Compatibility - NEC SL1000 Features And Specifications Manual

SL1000
Description
ISDN-BRI
Integrated Service Digital Network - Basic Rate Interface (ISDN-BRI) is a Public Switched Telephone
Network (PSTN) service that provides two B channels and a D channel (2B + D) for voice call trunking.
The B channels provide two voice path connections. Caller ID is usually a standard feature on
ISDN-BRI provided trunks. Caller ID indication displays the calling party telephone number on the LCD
of the Multiline Terminal for CO incoming calls. This interface provides voice communication path only.
I
ISDN-PRI
ISDN-PRI (Integrated Service Digital Network - Primary Rate Interface) is a Public Switched Telephone
Network (PSTN) service that provides 30 B channels and 2 D channel2 (30B+2D) for trunking. Caller
ID indication displays the calling party telephone number on the LCD of the Multiline Terminal for CO
incoming calls. This interface provides voice communication path only.
ISDN - BRI/PRI Features
• DID Line Service
When configured for DID Line Service, the trunks emulate Loop Start or Ground Start trunks for out-
going calls and DID trunks for incoming calls.
• Calling Line Identification Presentation (CLIP)
Program 10-03-05: ETU Configuration - CLIP Information Announcement, will allow the Calling Party
Number IE in the Setup Message for a call when placed out an ISDN Trunk.
• Calling Party Number (CPN) Presentation from Station
Calling Party Number (CPN) Presentation from Station allows each unique station or virtual exten-
sion 10-digit number (representing the DID number of the originating station) to be sent out over the
ISDN Network, if it is programmed. If there is no Extension Calling Number assigned, the system will
send the calling number for the ISDN trunk. If both the extension and trunk information is pro-
grammed, the extension information is sent as it takes priority.
• Calling Party Name:
If programmed, Calling Party Name allows the station name to be sent out over the ISDN network. A
system wide name can be programmed to be sent over the network or the name can be defined on a
per station basis. If both are programmed, the system wide name takes priority over the station
name.
• SMDR Includes Dialed Number
The SMDR report can optionally print the trunk name (entered in system programming) or the num-
ber the incoming caller dialed (i.e., the dialed ISDN digits). This gives you the option of analyzing the
SMDR report based on the number your callers dial. (This option also applies to a DID trunk as well.)
• Display Shows Why Caller ID is Not Available
With Caller ID enabled, the system provides information for ISDN calls that do not contain the Caller
ID information. If the Caller ID information is restricted, the telephone display shows UNAVAILABLE
INFO . If the system is not able to provide Caller ID information because the Telco information is not
available, then the display shows OUT-OF-STATE .
Conditions
• Primary Rate Interface (PRI):
The system is compatible with ISDN Primary Rate Interface (PRI) services. PRI services currently
supported include:
- Basic PRI Call Control (BCC)
- Display of incoming caller's name and number when allowed by Telco
- Routing in the system based on the number the caller dialed
- ISDN maintenance functions (such as In Service/Out of Service Messaging)
- Speech and 3.1 KHz audio
PRI capability requires the installation of 1PRIU-C1. Each PRI circuit provides 32 PRI channels (30B
1-298

ISDN Compatibility

ISDN Compatibility
ISSUE 1.0