NEC SL1000 Features And Specifications Manual page 317

ISSUE 1.0
In 15-01-04, enter 0
In 10-03-05 enter 0
In 20-09-03, enter 0 to
disable sub-address
display by telco.
In 14-01-07, enter 0
to prevent outgoing
calls.
program extensions
In 14-01-10, enter 0.
Features and Specifications Manual
A
Should Caller ID be included
No
in the call's setup message?
Should telco display the
No
calling number's sub-address?
In 21-12-01, program the calling party
number data (15 digits max.) for each
trunk.
In 21-13-01, program the calling party
number data (15 digits max.) for each
extension.
Are outgoing
No
calls allowed on
specific trunks?
In 14-05-01 assign PRI trunks to trunk groups
(This determines available channels for PRI trunks).
Do you need to restrict
In the default certain extensions from
placing calls on certain
trunks?
No
Should caller hear DTMF
No
confirmation tones as they
are dialing a trunk call?
If a user preselects a line, how
long should the system
remember the preselection?
No
If the system detects the called party is
busy, how long should the busy
tone be heard? (0-64800)
Go To
B
In 15-01-04, enter 1
Yes
In 10-03-05 enter 1.
In 20-09-03, enter 1 to
Yes enable sub-address
display by telco.
In 20-06-01, assign
Class of Service to
extensions.
In 14-01-07, enter 1 to
Yes
allow outgoing calls.
Build an out going
restriction matrix
In 14-07-01 for
each Access Map,
Yes select the access
options
for each trunk.
In 15-06-01,
assign extensions
to Access Maps.
Yes
In 14-01-10, enter 1.
In 20-02-06, enter
Yes
the preselection
interval.
SL1000
I
1-309