NEC SL1000 Features And Specifications Manual page 515

ISSUE 1.0
Program Program Name
Number
11-12-14 Service Code Setup (for Service Access)
- Trunk Group Access
14-02-11 Analog Trunk Data Setup - Next Trunk in
Rotary if No Dial Tone
14-05-01 Trunk Group - Trunk Group Number
14-06-01 Trunk Group Routing - Priority Order
Number
14-07-01 Trunk Access Map Setup - Trunk Port
Number
15-06-01 Trunk Access Map for Extensions
15-07-01 Programmable Function Keys
15-13-01 Loop Keys - Outgoing Option
15-13-02 Loop Keys - Incoming Option
20-02-02 System Options for Multiline Telephones
- Trunk Group Access Key Operating
Mode
20-29-01 Timer Class for Extension - Day/Night
Mode 1~8, Class Number
20-31-04 Timer Class Timer Assignment -
Intercom Interdigits Time (Intercom I/D
Timer)
21-01-02 System Options for Outgoing Calls -
Intercom Interdigit Time
21-01-05 System Options for Outgoing Calls -
Disconnect Time When Dial Tone Not
Detected
Operation
To place a call over a Trunk Group
1. At the multiline telephone, press Speaker.
- OR -
At the single line telephone, lift the handset.
2. Dial 804 .
3. Dial trunk group number (001~025).
4. Dial number.
- OR -
1. Press the Trunk Group key (Program 15-07 or SC 852 :
2. Dial the number.
To answer an incoming trunk group call:
1. Lift the handset.
2. Press the flashing Trunk Group key.
Features and Specifications Manual
Default
804
0
Trunk Port 1~126 = Priority 1~126
Route 1, Order Number 1 = 1 (Trunk Group
1)
Order Numbers 2, 3, 4 = 0 (Not Specified) All
Other Routes (2~25) and Order Numbers
(1~4) = 0 (Not Specified).
Access Map 1 = Trunk Ports 1~126 assigned
with option 7 access (incoming and outgoing
access and access when trunk is on Hold).
Access Map 2~126 = Trunk Ports 1~126
assigned with option 0 access (No access).
1
Refer to Programming Manual.
0: Programming Function Key No. = 01-24
0: Programming Function Key No. = 01-24
0
0
10 (seconds)
10 (seconds)
0 (seconds)
02 + group).
*
SL1000
Note
T
1-507