NEC SL1000 Features And Specifications Manual page 491

ISSUE 1.0
Program
Number
20-13-42 Class of Service Options (Supplementary Service) -
Extension Data Swap Enabling
92-05-01 Extension Data Swap Password - Password
The following programs are swapped when Station Relocation is used:
• Program 11-02 Extension Numbering
• Program 12-05 Night Mode Group Assignment for Extensions
• Program 13-03 Speed Dialing Group Assignment for Extensions
• Program 15-01 Basic Extension Data Setup
• Program 15-02 Multiline Telephone Basic Data Setup
• Program 15-03 Single Line Telephone Basic Data Setup
• Program 15-06 Trunk Access Map for Extensions
• Program 15-07 Programmable Function Keys
• Program 15-08 Incoming Virtual Extension Ring Tone Setup
• Program 15-09 Virtual Extension Ring Assignment
• Program 15-10 Incoming Virtual Extension Ring Tone Order Setup
• Program 15-11 Virtual Extension Delayed Ring Assignment
• Program 15-12 Conversation Recording Destination for Extensions
• Program 15-14 Programmable One-Touch Keys
• Program 16-02 Department Group Assignment for Extensions
• Program 20-06 Class of Service for Extensions
• Program 21-02 Trunk Group Routing for Extensions
• Program 21-04 Toll Restriction Class for Extensions
• Program 21-07 Toll Restriction Override Password Setup
• Program 21-10 Dial Block Restriction Class Per Extension
• Program 21-11 Extension Ringdown (Hotline) Assignment
• Program 21-13 ISDN Calling Party Number Setup for Extensions
• Program 21-15 Individual Trunk Group Routing for Extensions
• Program 21-19 IP Trunk (SIP) Calling Party Number Setup for Extension
• Program 23-02 Call Pickup Groups
• Program 23-03 Universal Answer/Auto Answer
• Program 23-04 Ringing Line Preference for Virtual Extensions
• Program 24-03 Park Group
• Program 26-04 ARS Class of Service
• Program 30-02 DSS Console Extension Assignment
• Program 31-02 Internal Paging Group Assignment
• Program 42-02 Hotel/Motel Telephone Setup
Operation
To exchange two terminals:
1. Pick up the handset or press Speaker.
2. Dial the Extension Data Swap Service Code - not assigned at default (Program 11-15-12).
3. Dial the Extension Data Swap Password - not assigned at default (Program 92-05-01).
4. Dial the extension to be swapped with or relocated to.
5. When successfully completed, confirmation tone will be heard and the display will show com-
pleted.
6. Press Speaker twice to exit.
Features and Specifications Manual
Program Name
SL1000
Default
COS 01~15 = 1
not assigned
S
1-483