Mitsubishi Electric MELSEC-Q Series User Manual page 259

Set with a decimal.
Setting
K
value
Set with a decimal.
Setting value
K
Set with a decimal.
Actual value
Cd.14 New speed value
Conversion into an integer value
Setting value
R
(Decimal)
Example: When the " Cd. 14 New speed
value" is set as "20000.00mm
/min", the buffer memory
stores "2000000".
Set with a decimal.
Setting
K 1
value
The Simple Motion module resets the value to "0" automatically
when the speed change request has been processed.
(This indicates the completion of speed change request.)
Setting value
Acceleration/deceleration time change value
during speed change, enable/disable
1 : Enables modifications to
acceleration/deceleration time
Other than 1: Disables modifications to
acceleration/deceleration time
Override value (%)
Unit conversion table ( Cd.14 )
m
10 m
2
3
3
0
When " Pr.83 Speed
control 10 x multiplier
setting for degree axis"
is valid: "2"
Speed change request
1: Executes speed change.
5 - 139
Chapter 5 Data Used for Positioning Control
Default
value
0
100
1 to 300
Unit
mm/min
0
inch/min
degree/min
PLS/s
0
Buffer memory address
4312+100n
4313+100n
4314+100n
4315+100n
4316+100n
n: Axis No.-1