Mitsubishi Electric MELSEC-Q Series User Manual page 64

Specifications of recommended manual pulse generator
Item
Model name
Ambient temperature
Pulse resolution
Output method
Power supply voltage
Current consumption
Output level
Life time
Permitted axial loads
Weight
Number of max. revolution
Pulse signal status
Start friction torque
(Note-1): If a separate power supply is used, use a stabilized power supply of voltage 5VDC ± 0.25V.
25PLS/rev (100 PLS/rev after magnification by 4)
Voltage-output, Output current Max. 20mA
"H" level : Power supply voltage
"L" level : 0.5V or less (with maximum leading-in)
1000000 revolutions (at 200r/min)
Radial load: Max. 19.6N
Thrust load: Max. 9.8N
Instantaneous Max. 600r/min. normal 200r/min
2 signals: A phase, B phase, 90° phase difference
2 - 4
Chapter 2 System Configuration
Specification
MR-HDP01
-10 to 60°C
4.5 to 13.2VDC
60mA
(Note-1)
-1V or more (in no load)
0.4 [kg]
0.06N•m (20°C)