Mitsubishi Electric MELSEC-Q Series User Manual page 687

Hide thumbs Also See for MELSEC-Q Series:
Table of Contents

Advertisement

[2] Precautions during control
(1) Before teaching, a "machine HPR" must be carried out to establish the HP.
(2) Teaching cannot be carried out for positions to which movement cannot be
(3) Writing to the flash ROM can be executed up to 100,000 times.
[3] Data used in teaching
The following control data is used in teaching.
Setting item
Flash ROM write
[Cd.1]
request
Teaching data
[Cd.38]
selection
Teaching
[Cd.39]
positioning data
No.
: Refer to Section 5.7 "List of control data" for details on the setting details.
(When a current value changing, etc., is carried out, "[Md.20] Feed current
value" may not show absolute addresses having the HP as a reference.)
executed by manual control (positions to which the workpiece cannot
physically move). (During center point designation circular interpolation
control, etc., teaching of "[Da.7] Arc address" cannot be carried out if the
center point of the arc is not within the moveable range of the workpiece.)
If writing to the flash ROM exceeds 100,000 times, the writing may become
impossible (assured value is up to 100,000 times).
If the error "Flash ROM write number error" (error code: 805) occurs when
writing to the flash ROM has been completed, check whether or not the
program is created so as to write continuously to the flash ROM.
Setting
value
Write the set details to the flash ROM (backup
1
the changed data).
Sets to which "feed current value" is written.
0: Written to "[Da.6] Positioning address/
movement amount".
1: Written to "[Da.7] Arc address".
Designates the data to be taught.
(Teaching is carried out when the setting value
is 1 to 600.)
When teaching has been completed, this data
is zero cleared.
13 - 83
Chapter 13 Control Sub Functions
Setting details
Buffer memory address
5900
4348+100n
4349+100n
n: Axis No.-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Melsec-qd77gf4Melsec-qd77gf8Melsec-qd77gf16

Table of Contents