Table of Contents
Advertisement
Installation
DS1000 Installation
Step 2
- Unlock and remove the cover.
Step 3
- This will make reinstallation easier.
- If possible, leave the ground wire connected. This will help prevent static damage when plugging in
Step 4
Step 5
- Unscrew the 2 captive screws that secure the cabinet top panel to the base.
- Lift up and remove the top panel.
2 ◆ Chapter 1: Quick Setup
(Figure 2: Removing the DS1000 Cover)
Remove the cover
Push button
to "OPEN" position
Figure 2: Removing the DS1000 Cover
Label and unplug all extension, trunk, and auxiliary cabling.
the IntraMail PCB.
Remove the DS1000 cabinet from wall.
Remove the cabinet top panel
3
1
Figure 3: Removing the DS1000 Top Panel
(Figure 3: Removing the DS1000 Top Panel)
.
.
2
IntraMail System Guide
Advertisement
Table of Contents
