Programming That Applies To All Types Of Message Notification - NEC IntraMail 4 System Manual

Message Notification
■
If the pager service doesn't answer, IntraMail will retry the callout number. Message Notification may
eventually cancel if the callout remains unacknowledged.
Related Features
Security Code (page 164)
To protect their mailbox from unauthorized access, the subscriber should be sure to record a Security
Code for your mailbox before enabling Message Notification.
Programming
Programming that Applies to All Types of Message Notification
Step 1
Step 2
Step 3
Step 4
134 ◆ Chapter 2: Features
Assign the trunk group the system uses for Message Notification callouts.
8002 - Dial 9 Group
1.1
.
- Select the trunk group (90-98) Message Notification will use for callouts. You must make
this assignment and have trunks in the designated group for Message Notification call-
outs to work.
✔
By default, this option is 90.
Check to be sure the following Voice Mail port options do not restrict Message Notification
callouts.
8002 - Voice Mail Port Options (Part 1): Class of Service on page 209.
2.1
8002 - Voice Mail Port Options (Part 1): Toll Restriction Level (Day) on page 209.
2.2
8002 - Voice Mail Port Options (Part 1): Toll Restriction Level (Night) on page 209.
2.3
8002 - Voice Mail Port Options (Part 1): Dial 9 Group on page 210.
2.4
8002 - Voice Mail Port Options (Part 1): Outgoing Trunk Group Access on page 210.
2.5
8003 - Voice Mail Port Options (Part 2): Trunk Access Type on page 212.
2.6
Set the maximum number on incomplete callout attempts.
8004 - IntraMail System Options: Number of Callout Attempts on page 216.
3.1
- Set how many times (1-99 attempts) IntraMail will retry an incomplete Message Notifica-
tion callout. This total includes unacknowledged callouts, callouts to a busy destination,
and callouts to an unanswered destination. This option applies to pager and non-pager call-
outs. The default setting for this option is 5.
✔
The default setting for this option is 5 attempts.
Be sure Message Waiting lamping for Subscriber Mailboxes is on.
1808 - IntraMail Subscriber Mailbox Options: Message Waiting Lamp on page 204.
4.1
- Enter Y (9) to enable Message Waiting lamping.
- If Message Waiting lamping is disabled (N), Message Notification will not function.
✔
By default, this option is Y (9).
IntraMail System Guide