2 (Announcement)
■
3 (Subscriber)
■
4 (Directory Dialing)
■
0 (Undefined)
■
Default
✔ 3 (Subscriber)
Mailbox Active
(MAILBOX ACTIVE)
Use this option to activate the selected mailbox. IntraMail can not use the mailbox unless it is active. See the
following for more:
Announcement Mailbox on page 22.
■
Call Routing Mailbox on page 49.
■
Directory Dialing on page 68.
■
Subscriber Mailbox on page 168.
■
Options
Y (Yes)
■
N (No)
■
Default
✔ Y (Yes)
Options for Call Routing Mailboxes (1)
The following options are available to Master Mailboxes assigned as Call Routing Mailboxes. For more on
each option, refer to 8006 - IntraMail Routing Mailboxes: Options for Call Routing Mailboxes on page 228.
Dial Action Table
■
Screened Transfer Timeout
■
Time Limit for Dialing Commands
■
Fax Detection
■
Options for Announcement Mailboxes (2)
The following options are available to Master Mailboxes assigned as Announcement Mailboxes. For more on
each option, refer to 8006 - IntraMail Routing Mailboxes: Options for Announcement Mailboxes on page 229.
Next Call Routing Mailbox
■
Repeat Count
■
Hang Up After
■
Options for Subscriber Mailboxes (3)
The following options are available to Master Mailboxes assigned as Subscriber Mailboxes. For more on
each option, refer to 1808 - IntraMail Subscriber Mailbox Options on page 202.
Number of Messages
■
Message Playback
■
Auto Erase/Save of Messages
■
Message Retention
■
Recording Conversation Beep
■
Message Waiting Lamp
■
Auto Attendant Do Not Disturb
■
Forced Unscreened Transfer
■
Auto Time Stamp
■
System Administrator
■
Alternate Call Routing Mailbox
■
Next Call Routing Mailbox
■
IntraMail System Guide
8005 - IntraMail Master Mailbox Options
8000 - Voice Mail
Chapter 3: Programming ◆ 219
3