8003 - Voice Mail Port Options (Part 2); Options; Trunk Number; Trunk Access Type - NEC IntraMail 4 System Manual

8000 - Voice Mail

8003 - Voice Mail Port Options (Part 2)

8003 - Voice Mail Port Options (Part 2)
Description
Use the 8003 - Voice Mail Options (Part 2) to set trunk access for Voice Mail ports. The settings you make in
this option apply globally to all Voice Mail ports.

Options

Trunk Number

(LINE NUMBER)
Use this option to select the trunk you want to program. Trunk numbers are 1-6 in DS1000 and 1-64 in DS2000.
Options
Trunk number (1-6 in DS1000, 1-64 in DS2000)
■
Default
✔ N/A

Trunk Access Type

[N/A]
For the trunk selected above, use this option to select the access type. All Voice Mail ports use the access
type specified in this option for the selected trunk. A Voice Mail port can on dial out on a specific trunk only
if it is allowed in this option. This may occur when Voice Mail is processing Message Notification callouts.
You make a separate entry for each trunk.
See Message Notification on page 133.
■
Options
0 (No access)
■
1 (Incoming only)
■
2 (Outgoing only)
■
3 (Full access)
■
Default
✔ 3 (Full access)

8003 Program Entry

+ #*#* + Password (372000) + HOLD + 8003 + HOLD .
ICM
LINE NUMBER (1-6 in DS1000, 1-64 in DS2000) [N/A]
Press this:
HOLD
CONF
▲ ▼
VOL or Vol
CHECK
212 ◆ Chapter 3: Programming
8003 - Voice Mail Options (Part 2) Program Entry
(Entry Range) [Default Setting]
Select Access Type
(0=No Access, 1=Incoming Only, 2=Outgoing Only, 3=Full Access) [Full Access]
Enter (accept) data you entered.
Cancel your entry and back up to the previous prompt level.
Scroll to the next prompt.
Restore the previous entry.
To do this:
IntraMail System Guide