Time And Date Stamp; Time And Date Stamp With Caller Id - NEC IntraMail 4 System Manual

Time and Date Stamp

Time and Date Stamp
Description
While listening to a message, a Subscriber Mailbox user can dial TI to hear the Time and Date the message
was left. This is a handy option while reviewing messages. The subscriber can just dial a code to find out
when the message arrived.

Time and Date Stamp with Caller ID

With caller ID installed, a mailbox user can dial TI while listening to a message to hear the time the message
was sent, as well as the caller's number.
Related Features
Auto Time Stamp (page 41)
After a user listens to a message, IntraMail can optionally announce the time and date the message was left.
Caller ID (page 56)
With Caller ID installed and programmed, the Time and Date Stamp also includes the caller's number.
Listening to Messages (page 109)
Turn to this feature for additional listening options.
Time and Date (page 175)
You can set the system Time and Date from the telephone system programming or using the User-Program-
mable Features.
Programming
To get Time and Date Stamp with Caller ID, be sure Caller ID is properly installed and programmed in the
connected telephone system.
Operation
Log onto Subscriber Mailbox.
(5) Access the Message Listen mode.
L
[LISTEN] - [LSTN]
TI (84)
0 Plays Help message
176 ◆ Chapter 2: Features
Hearing the Time and Date a Message was Left
Hear the time and date the message was sent.
■
Turn to Listening to Messages on page 109 for more on your listening options.
IntraMail System Guide