Infocenter Diagnostics - Toro Greensmaster TriFlex 3300 Manual

Hide thumbs Also See for Greensmaster TriFlex 3300:
Table of Contents

Advertisement

Cleaning the Electronic Components and Connections
Note:
Use electrical-contact cleaner only. Do not use brake cleaner, as it may permanently damage electrical
connector bodies and other plastic components of the machine. Avoid using mineral solvents, as they may
damage connectors, seals, and wire insulation.
WARNING
Cleaning chemicals and tools can cause injury if used improperly.
Refer to the applicable MSDS for appropriate personal protective gear, such as gloves,
respirators, and safety glasses.
1.
Mark the wires for proper installation after cleaning is completed. Remove pins from connectors with the
proper extraction tool.
2.
Clean the terminals or the connector pins using an eraser, mild abrasive paper, or a nylon or fiber bristle
brush. Do not use metal or metal oxides.
3.
Finish the cleaning with a fiber bristle brush dipped in isopropyl alcohol.
4.
Gently wipe off the clean pins, terminals, and components with a lint-free cloth dampened with isopropyl
alcohol.
5.
When available, dry the components with dry, oil-free compressed air with a pressure no more than
138 kPa (20 psi).
6.
Ensure that all connectors and components are clean and dry prior to reassembly and testing.

InfoCenter Diagnostics

The InfoCenter Diagnostics screen displays the current status of various machine electrical components and
battery voltages
(Figure
possible.
1. Indicator light
2. Right button—press it to open a menu when a right arrow
indicates additional content.
To find additional information on navigating the InfoCenter menu items, refer to the InfoCenter Display section in
your machine's service manual, or to your machine's operator's manual. See the
(page 8)
section in this manual for help obtaining the correct manuals for your machine.
2). Use the DIAGNOSTICS screen to test machine switches and controls when
Figure 2
3. Middle button—press it to scroll down the menus or digits
for PIN code.
4. Left button (menu access/back button)—press it to access
the InfoCenter menus. Also use it to back out of any menu
that you are currently using.
12
External Reference Material
g020650

Advertisement

Table of Contents
loading

Table of Contents