Connector Pin - Toro Greensmaster TriFlex 3300 Manual

1. Console
2. InfoCenter
Step 4: Test the InfoCenter CAN bus wiring.
1. Unplug connector P56 from the back of the InfoCenter.
2. Use a multimeter to test the resistance between the following pairs of locations:
Location Harness
1 Seat
2 Seat
1 Seat
2
1 Seat
2
Pass The CAN bus wiring tests passed. Go to Step 7.
Fail One or more of the CAN bus wiring tests failed. Repair or replace the worn or damaged parts. Go to
Returning the Machine to Service (page 21)
Connector Pin
P56 3
P56 4
P56 3
Chassis ground
P56 4
Chassis ground
Figure 184
3. Main harness connector P56
4. InfoCenter retaining ring
Wire Expected
Color Reading
Red/
White
(R/W)
54 to 66
ohms
Black/
White
(BK/W)
Red/
White
Open
(R/W)
(infinite)
Black/
White
Open
(BK/W)
(infinite)
and follow the steps listed.
330
Connector Graphic
g240322