Step 8: Test the CAN Bus terminators on the TriFlex harness.
1.
Remove the right side cover
1. Right side cover
2.
Locate the two terminators and unplug them from the harness
1. E-reels fuse block
2. CAN bus terminator in TriFlex harness connector P42
(Figure
32).
Figure 32
Figure 33
3. CAN diagnostic port (TriFlex harness connector P51 in a
4. CAN bus terminator in TriFlex harness connector P41
61
(Figure
33).
protective cap)
g237042
g246029