Toro Greensmaster TriFlex 3300 Manual page 316

4. Remove the four mounting bolts that secure the primary TEC-5001 controller
5. Lift the primary TEC up and out of its mounted location
6. Fully loosen the socket-head screw that secures main harness connector P01 to the primary TEC and
then unplug the connector
1. Primary TEC controller
2. Main harness connector P01
7. Use a multimeter to test the resistance between the following pairs of locations:
(Figure 177).
Figure 177
316
(Figure 177).
3. Socket-head screw
(Figure 176).
g237657