Toro Greensmaster TriFlex 3300 Manual page 58

Step 4: Test the 48 V battery pack voltage, disconnect harnesses,
fuse, and wiring.
This Step verifies that the 48 volt battery pack is at the correct voltage, both battery disconnect harnesses are
good, and that the wiring from the main contactor through the 10-amp fuse to the 48V Logic relay is good.
1. Verify that the machine is shut down and that the key is removed from the ignition.
2. Remove the left side cover
1. Operator's seat
3. Remove the e-reels harness connector P07 from the bottom of the 48V Logic relay
(Figure 30).
Figure 30
58
2. Left side cover
g233994
(Figure 31)