Toro Greensmaster TriFlex 3300 Manual page 153

Location Harness
1 Main
2 Main
Pass There is no resistance (0–5 ohms) between wire ends. Go to Step 4.
Fail There is high resistance or open between wire ends. Repair or replace all damaged wire. Go to
Returning the Machine to Service (page 21)
Step 4: Test the DC alternator.
Note:
For gasoline engines, refer to the Briggs and Stratton DC alternator output performance test in Chapter
3 (Gasoline Engine) of the Greensmaster TriFlex 3320/3420 Service Manual. For diesel engines, refer
to the Kubota SM-E3B Series DC alternator output performance test in Chapter 4 (Diesel Engine) of the
Greensmaster TriFlex 3320/3420 Service Manual.
Pass The alternator DC output performance test passed. Repeat the diagnostic process.
Fail
The alternator DC output performance test did not pass. Replace the DC alternator as shown in the
Engine chapter of the Greensmaster TriFlex 3320/3420 Service Manual. Refer to
Machine to Service (page
Pin
Connector
P01 12 White (W)
P12 2 White (W)
21).
Wire Expected
Color Reading
Open
(infinite)
and follow the steps listed.
153
Connector Graphic
Returning the