Safety; Maintenance And Service - Toro Greensmaster TriFlex 3300 Manual

Safety

The machine has been tested and certified by Toro for compliance with existing safety standards and
specifications. Improper use or maintenance of the machine can result in injury or death. To reduce the
potential for injury or death, comply with all of the safety instructions found in the Greensmaster 3300/3320
TriFlex Traction Unit Operator's Manual or Greensmaster 3400/3420 TriFlex Traction Unit Operator's Manual,
and Greensmaster TriFlex 3300/3400 Service Manual, and the following specific service-related precautions.

Maintenance and Service

•
Before servicing or making any adjustments to the machine, set the parking brake, turn the key to the O
position, and remove the key from the key switch. Wait for all of the machine motion to stop. Refer to
the operator's manual for your machine.
•
Keep all nuts, bolts, screws, and belts properly tightened.
•
To reduce any potential fire hazard, keep all electrical connectors, cutting units, and drive components
free of debris.
•
Wear cut-resistant or heavy leather gloves and use caution when checking or servicing the cutting units.
•
If you must perform maintenance or make an adjustment with the engine running, keep your hands, feet,
clothing, and all parts of your body away from the cutting units and all other moving parts.
•
At the time of manufacture, the machine conformed to all applicable safety standards. To ensure optimum
performance and continued safety certification of the machine, use only genuine Toro replacement parts
and accessories.
7
FF