Toro Greensmaster TriFlex 3300 Manual page 196

1. Operator's seat
3. Locate the mow control manifold and solenoid SRV
1. Mow control manifold
4. Unplug wire harness connector P04 from the SRV solenoid.
5. Use a multimeter to test the resistance between the two pins in the connector on the solenoid. The
reading should be between 6 and 8 ohms.
Pass The resistance measurement was good.
•
Plug connector P04 back in to the SRV solenoid.
•
Go to Step 3.
Fail The resistance measurement was not good. Repair or replace worn or damaged parts as
required. Go to
Figure 117
Figure 118
Returning the Machine to Service (page 21)
196
2. Left-hand cover assembly
(Figure 118).
2. Solenoid SRV
and follow the steps listed.
g233994
g239291