KitchenAid 5KSMSIA Product Manual page 6

PRODUCT USAGE
ICE PUCK PREPARATION
1.
Fill the ice mold with water or flavored ice base mixture of your choice.
NOTE: To keep the mold from overflowing while freezing, be sure not to fill past the fill line
visible just below the rim of the mold.
2.
Affix the lid to the top of the mold and place it in the freezer for 12 to 24 hours.
NOTE: Freezing time may vary and will depend both on the temperature of your freezer as
well as the sugar or alcohol content of your mixture.
NOTE: See "Tips for Great Results" section below for more details on Ice Puck
Preparation.
SET UP & ASSEMBLY - PREPARING TO MAKE SHAVE ICE
Before using your Shave Ice Attachment, clean it by following the detailed instructions in
"CARE & CLEANING" section.
1.
After removing the ice molds from the freezer, press firmly on the bottom and sides to help
release the puck from the mold.
6