Toshiba Strata DK 280 Installation Manual page 179

Program 77-1, LED I%-Sets the RMDS
communications standard type to CCITT/V.22bis
(2400 bps) or Bell 212A (1200 bps). The standard set
in this program must match the standard of the
modem communicating with the DK280 RMDS. If the
RMDS modem standard should be CCITT/V.22bis,
turn LED 15 "On". If the RMDS standard should be
Bell 212A, turn LED 15 "Off". Most Hayes compatible
modems will function with either standard. Check with
the modem manufacturer's documentation to verify
which protocol should be used. When the system is
initialized the Bell 212A standard is set (LED 15 Off).
Program 77-4, LED OWLED 02
n Enables CLID, ANI, and/or DNIS information for
ACD calls to be sent from the RSIU OA port.
n Turn LED 01 "On" if the OA port should send CLID
and/or ANI information for ACD calls.
n Turn LED 02 "On" if the OA port should send
DNIS information for ACD calls.
Notes:
1. Program 77-4 allows LED 01 and LED 02
to be turned On simultaneously, allowing
CLID, ANI, and DNIS information to be
sent from the OA port for ACD calls.
2. The system will initialize with LED 07 and
02 "Off" - no CLID, ANI, or DNIS
information will be sent from the OA port
for ACD calls.
January 1996 4-63