Toshiba Strata DK 280 Installation Manual page 779

c
6. Repeat steps 2 - 7 to
enter more
names/numbers.
9. To turn Soft Keys on
again, press
MODE +
7 1 when your
telephone is idle.
To Erase Other Station's
Name/Number Display:
W From station 200,
repeat steps one
through six of the
previous procedure and
press
1
in the alpha
mode in Step 5.
Note:
You can set and clear the Name/Number feature anytime through
Station NNN by :
n Set: Press a
[DN] + t 6 2 1.
E C/ear; Press a [DN] + # 6 2 0. "Clear"
eliminates the display
when ca//ing, but does not erase it from memory.
To Program Speed Dial
Names and Numbers:
1. Press RDL, then press
SDS.
2. Dial the desired speed
dial code.
Speed Dial Memo
This feature enables you to program a 12-character name for each of 40
personal speed dial numbers. The memo pad of names may be stepped through
to select the appropriate party. Memos may also be added to the 40 or 100
system speed dial codes. depending on your system's size, via the station
connected to port 000, station number ~ (usually 200).
Press * if your telephone is not equipped with an SDS button.
NN or NNN = Speed Dial Code. (10 - 49 from any station) or (60 - 99 or 600 -
699, depending on your particular system size, from station 200 only)
3. Press MODE, If a name was previously stored on this code, it will display on the top line of the
LCD.
Enter the name or
memo (refer to
Recording a Message
for method).
Press
MODE.
Enter the desired
telephone number (16
digits maximum).
Press
RDL
to record
data in memory.
To Dial a Speed Dial
Number:
1, Press
MODE
when
telephone is idle.
2. Dial 8 NN or NNN.
3.
Press
PAGE
to
scan
the directory for the
appropriate
number/memo.
4. Press any available CO
button
-or-
press [DN] and press
the CO line access
code.
5. The number is dialed.
The name will appear on the bottom line of the LCD as you enter it.
The number will appear on the top line of the LCD as you enter it.
The name can be up to 12 characters.
The LCD displays "MODE NO.?".
The speed dial number appears with name or memo. NN or NNN = personal or
system speed dial codes. Personal speed dial code numbers are 10 - 49, and
system numbers, stored from station 200 only, are 60 - 99 or 600 - 699,
depending on your system size.
38