Toshiba Strata DK 280 Installation Manual page 382

always be only two muted ring bursts -
three seconds apart.
3. Busy Override and Camp-on muted ring
tone frequency: Digital and Electronic
telephones 1209Hz/modula ted by 1 OHz
on CO line calls; 1209Hz/unmodulated on
Station to station calls.
IMPORTANT!
With DK280 Release 3, assign all ports of a
VM Group to a unique Program
*40
Distributed Hunt (OH) Group - Telephones
should Call and/or Call Forward to the DH
Group Directory Number to connect to VM.
4. Standard telephone - Camp-on tone is
sent when the busy standard telephone
n
Voice Mail (VM) to VM Call Blocking, LED 04-
receives a transferred CO line call; and
This prevents VM/auto attendant ports from call
BOV tone is sent when the busy standard
forwarding to other VM ports during screened or
telephone receives a direct call from a supervised voice mail transfers. If auto attendant
station or CO line. Camp-on tone is two calls are screened or supervised, this LED should
one-second bursts of 1209Hz/interrupted be ON for all VM/auto attendant ports; if VM/auto '
by 760ms bursts, three seconds apart.
BOV tone is a 760ms burst of 1209Hz/
attendant calls are ring (blind) transferred, this
LED should be OFF for all VM/auto attendant
unmodulated, twice - three seconds apart.
ports.
All Call Page Allowed-Digital and Electronic
Telephones, LED IO-Any station may be
allowed to receive an All Call page. This does not
alter the station's ability to initiate an All Call Page.
A maximum of 120 stations may be paged at one
time. See Program *30 for telephone page group
assignments and Program 10-2, LED 15 for
External Page with All Call Page option.
n
Off-hook Call Annouhce (OCA) Enabled
(Receive), LED OS-Any digital or electronic
telephone equipped for OCA should be assigned
this option to receive OCA. This program does not
affect the station's ability to originate OCA. See
Chapter 2-Site Requirements to identify which
slots can support OCA.
Voice Mail (VM) No Conference, LED 09-If
activated, a station is prohibited from having any
Conference calls. It should be used for VM
(RSTU, RSTU2, PSTU, PESU, RDSUIRSTS)
ports to prevent undesirable Conference calls
between two voice mail Auto Attendant ports.
Voice Mail (VM) Groups 1 - 4, LED 05 w 08-
The system allows up to four VM station port
groups to be configured for support of up to four
VM/auto attendant devices. One group is intended
for each different machine. All standard telephone
ports (RSTU, RSTU2, PSTU, PESU,
RDSU/RSTS) connected to a particular VM
machine should be assigned to the same VM
group. The purpose of the VM grouping is to allow
efficient use of the message waiting (MW) set and
cancel operations from the VM machine. Since
each digital, electronic, and standard telephone
can only have a maximum of four messages
waiting, the VM device should set MW only once,
regardless of how many messages there are.
To receive OCA from the telephone speaker, the
telephone must be equipped with special
hardware: Digital DVSU and Electronic
HVSU/HVSI; the PDKU PCB supporting OCA
must have code 62 or 64 set in Program 03; and
Electronic telephones must have a third pair of
wires from the PEKU. Digital telephones: to
receive OCA over the handset/headset (R3 and
above), no special Hardware or programming
options are required except Program 31 LED 03,
and 14 must be ON. Digital telephones can
receive either speaker or handset OCA.
Electronic telephones can receive speaker OCA
only. OCA is not available to be received by
standard telephones.
n
Handsfree No Warning, LED 02-Normally, a
one-second warning tone is sent to a handsfree
digital or electronic telephone to inform its user
that someone is calling and that they can be
heard. If the warning tone is not desired at the
called digital or electronic telephone, this
assignment can disable it. This will also prevent
ringing the digital or electronic telephone as a ring-
first situation, allowing silent room monitoring of
the area surrounding the telephone. Initialized
data activates the warning tone for all ports.
9-22 January 1996