Toshiba Strata DK 280 Installation Manual page 772

Table 1
Paging Croup and Zone Codes
Paging Group Codes Paging Zone Codes
# 3
1
I-Group A I 3
1
%-Group E #I 3 3-Zone A
# 3
1
Z-Group B # 3 16-Group F It 3 6-Zone B
#31~roupC # 3 17-Group G # 3 7-zone c
II 3
1
Mroup D # 3 16-Group H # 3 6-Zone D
Enter code # 3 0 to page stations assigned to the All Call Page group.
Enter code # 3 9 to page stations assigned to the All Calt Page group and
possibly external page zones, depending on system programming.
The LCD will show the 9 9 9 Auto Park entry plus the entered Page Zone
number.
[:":",:'c:,,,ol
To Retrieve a Parked Call:
1. Press the parked CO
line, or press PARK or
CPIPG.
2. Enter the Orbit Number
or valid [PDN] on which
the call is parked.
The LCD shows the line number which is being held on a particular orbit number.
In this example, Line 2 is held on orbit number 900.
If you do not retrieve the parked call within a specified amount of time, the call
will ring back to your phone. When a parked call recalls and rings back to your
phone, the LCD will show the line or [DN] that is recalling and the orbit number.
Parked Call Retrieval
The Orbit Number is usually provided in the paging announcement. The CO line
LED or [PDN] LED will flash at the In-use rate when the call is picked up or
retrieved.
To Display Parked Calls:
1. Press MODE.
IMOE
NO. ]
.,
2. Press 6 6.
[LN NN ORBIT XXX 1
.I
3. Press SCRL to monitor
the next parked call.
4. Press SCRL to monitor
the next parked call.
Park Orbit list Display
This feature enables you to monitor (view) the calls that are parked at your
station.
If your telephone has a CPM button, press it and go to Step 3.
Your telephone must be idle to use the MODE button when displaying the Park
Orbit List.
The display shows that Line N N (where N N represents the Line number) is
parked by you on Orbit XXX (where XXX represents the orbit "umber). The "+"
sign indicates that there is more than one parked call at your station.
This display indicates that CO Line 003 is parkid by you at Orbit 900 (where 900
represents a different Orbit number).
The first parked call is displayed again, indicating there are only two parked calls
at your station.
Retrieve and Auto Dial Lost Calls
The system automatically saves the number for all ANI and Caller ID calls that
ring at your telephone, but are unanswered (abandoned calls). You may view and
Auto Dial the saved numbers by following the steps for retrieving lost calls.
To Retrieve Lost Calls:
1. Press
MODE
+ 6 2.
24 25