Toshiba Strata DK 280 Installation Manual page 348

Table 8-2
Multidimensional Program: Program 30 - Station Class of Service
Press...
Steo
Buttons + LED buttons
NO.'
Action description
LCD RESPONSE . . .
1. Use the programming 20 button LCD digital or electronic
NO.
205
telephone connected to physical port 005 (station 205) -
JAN 20 SUN
06:43
circuit 6.
Make sure the programming keystrip template is
installed on the programming telephone (see the
Keystrip Template information in Section 8.2.2).
2. *#*#1*2*3
Enter programming mode. PROGRAM MODE
(Do not press Intercom or [DN] button)
3.
Spkr (Speaker) 3 0 Hold
PROGRAM = 30
Access Program 30. System beeps after pressing Spkr
(Speaker) button. You can now enter program number.
DATA STORE
4.
Spkr (Speaker)
30 SELECT =
Prepare system for a port number selection.
5.
OOO#-239#
30 SELECT = (000 - 239)
Enter the port number where the station being defined is
connected. Use three digits, followed by a # button. A
range of ports may be entered at once by using the *
button. (See Note on system record sheet.)
6.
LED buttons 01 w 20
LED buttons 01 - 20 activate features for each station
port or port range. Make the following selections by turn-
ing the appropriate button LED ON or OFF for each item
(01 - 20) for each port, as marked on the system record
1
sheet:
LED 01: Speakerphone Enabled
LED 02: Microphone Key Lock Enabled
LED 03: Microphone ON at Start of Call
LED 04: Not Used
LED 05: Speed Dial Allowed
LED 06: Automatic Busy Redial Access Enabled
LED 07: Automatic Off-hook Call Announce
LED 08: Forced Account Code Enabled
LED 09: Toll Restriction Override Code Revision
Authority
LED 10: DISA Security Code Change Allowed
LED 11: Dial Pulse (DTMF Off) for Standard
Telephone
8-8
January
1996