Toshiba Strata DK 280 Installation Manual page 297

DB-25 RS-232
(MALE)
TO:
SMDI VM PORT
OR
ACDIMIS PC
OR
EXTERNAL
MODEM I TERMINAL
OR
PDIU-DS
l
7-BIT
l
EVEN PARITY
l
l-STOP BIT
DB-25 RS-232
(MALE) \
TO PRINTER
OR
CALL
ACCOUNTING
DEVICE
l
8-BIT
. NO-PARITY
l
ONE-STOP BIT
Note 1: If connected to external modem,
interchange pin 2 and pin 3; and pin 8 and pin 20.
Wire colors may vary with other
types of modular adaptors.
MAINTENANCE
- TYDTR
TOSHIBA RS232lMODULAR
Genera/ Notes:
.
PIOU option settings:
SW1 - Sets the SMDR baud rate to be 300 or 1200
BPS.
SW2 - Sets the PIOU programming speed to be 300
or 1200 BPS (for IMDU or TTYjack).
LED CO4 "On" = 300 BPS/S W2 set "in".
LED CO4 "Of? = 1200 BPS/S W2 set
'Our.
S W3 - Sets the PlOlJ to operate with the IMDlJ or an
external device connected to the 77-Y
modular jack.
- ..-..
STATION MESSAGE
DETAIL RECORDING
PORT
PIOU MODULAR PIN-OUT
MODEM - For IMUU operation.
TTY
- For ASCII terminal or
external modem.
rr I c; rw-uu I
P13 - Sets the IMDU and l7Y jack for bell or
CC/n specification.
.
PPTC-9 should be used if device connected to PlOLJ
has a DB-9 1X-232 male connector.
Figure 7-18
PIOU/TTY and SMDR Wiring
PIOU
CARD
f
TTY
(6-PIN
MODULAR
JACK)
SMDR
(6-PIN
MODULAR
JACK)
(25-PAIR
FEMALE
AMP.
JACK)
SEE
PIOUIMDF
DRAWING
IN THIS
SECTION '
January
1996
7-23