Toshiba Strata DK 280 Installation Manual page 461

Program 26 -
Built-in Auto Attendant Camp-On-Busy Time
~~~~[;TI~~~[si-~~~~HoldI-1Spkr/r~r~r~~r~nn/Holdl-~~~~l-1Spkrl~~~~
SELECT = Port Number (000-239) -
- HOLD TIME = Auto Attendant (AA)
Enter the number of the called Station logical Camp-on-Busy Time
port that needs a Camp-on-Busy time assigned.
Enter the Time (in seconds). The acceptable
See Note 1 for entering a range of ports. range is 011 - 999 seconds. Use
three digits. See Note 2.
208 i 209 I 210 I 211 212 ! 213 214 ! 215
218 1 217 i 218 I 219 220
221 222 223
1 I
/ j
I /
224 / 225 1 226 i 227 228 1 229 I 230 231
232 ! 233 1 234 ( 235 236 237 238
239
I
!
!
1
I 1
Notes:
DK0122
1. To specify a range of ports, enter in the sequence:
q cln~clclcl
~owpori
J
I- High port
2. 999 seconds equals 16.65 minutes.
General Notes:
l
Initialized data assigns a AA Camp-on-Busy Time of 016 seconds to all ports.
l
This timer sets the time that Auto Attendant calls to a busy station will camp-on before routing back to a primary
announcement or to the calling CO line's normal ring pattern. (See Program 10-3, LED 3 for routing option after Camp-
.' on-Busy). The time set in this program applies to the called station.
l
This program only applies to Auto Attendant (Built-in) calls; it does not apply to ring transfer camp-on time from stations
or customer-supplied Auto Attendant devices; see Program 37 Ring Transfer (Camp-on) recall time.
l
If CF-NA or CF-B/NA is set on a Telephone, the CF-N/A ring timer will have priority over this l6-sec. camp-on-busy
timer. Auto Attendant calls to a ring-no-answer or busy station will only forward to one destination, if the CF destination
station has call forward set, the call will camp-on for 16-seconds and then route per the Auto Attendant flow
diagram-the call will not forward a second time to another destination.
January 1996