Toshiba Strata DK 280 Installation Manual page 581

Program 44-91-93 -
Emergency Bypass of Forced/Verified Account Codes
~~li;l~~~~~~[Sl-lspkrlRRI~~nn-nnnn~-~~~I-/SpkrllTf/~~j
SELECT = 91 - 93 1 TAT,4 = 1 to 4-digit emergency
to set
Emergency
telephone number
Number 1 - 3
To enter blanks,
Press: Button/LED 01
Example:
Emergency Number 1:
q
m mmmn 911 = initialized Data
Emergency Number 2:
q q nnnn 9911 (Notel)
DK0411
Emergency Number 3:
Em q uuu
SELECT = J-
L DATA = 1 to 4-digit telephone number
Note:
1. If CO lines are behind PBX or Centrex, program the PBWCentrex outside CO line access code: Example: "9". A
pause is automatically inserted following the first 9. See Programs 42-O and 42-l to assign the CO line and
access code for behind PBXICentrex operation. Also, if the system CO lines are behind Centrex/PBX, the
Centrex/PBX CO line access codes must be programmed in front of the emergency telephone number. Example:
If the CentretiPBX access code is "9", then enter 991 I in Program 44-91 - 93.
General Notes:
l
The emergency telephone numbers assigned in this program will be sent out to the CO line immediate/y when
dialed; they wili bypass the Forced/Verified Account Code dialing restriction.
l
If Verified Account Codes assigned in Program 69 conflict (are the same) with emergency telephone numbers
assigned in Program 44-91 - 93; Program 44-91 - 93 has priority.
l
This feature is for use wifh Forced (Verified or Nonverified) Account Codes, but not with ABR and DISA. It also
does not override Toil Restriction; emergency numbers must be allowed using system Toll Restriction tables per
normal Toll Restriction programming procedures.
l
Program 44-1 -
chapter.
8 is related to Toll Restriction and is placed with the other To/i Resfriction programs in this
January 1996
1 O-l 67